MIC-TZD Vibration and temperature monitoring transmitter Manual

Short Description:

MIC-TZD integrative vibration and temperature transmitter, integrating the traditional vibration and temperature sensor and the accuracy measuring circuit together, not only achieve “sensor + transmitter” mode vibration measurement system function, but also achieve economic but high accuracy vibration measure system. The transmitter can connect directly with PLC, DCS or other systems. Mounted on the bearing cover of rotating machines, the transmitter is an ideal choice for steam turbine, compressors, motors, blower, fans, water pump etc to measure vibration speed or vibration amplitude. Because its output signals are caused by moving coils cutting magnetic force line, so its power supply can be 24VDC, easy installation and maintenance. The transmitter can be used widely in heating and power plant, cement plant, machine plant, blower plant, paper made plant, coal mine machine etc.

Product Detail

Product Tags


Huge range

Short thermal response time, reducing dynamic error

High mechanical strength, slightness, fast thermal response, good shock and pressure resistance;

Working Principle

Thermal resistance measure the temperature by its characteristics: its resistance also changes when the measured object temperature changes. When the resistance changes the working instrument will show the temperature value corresponding to resistance value.


Sensitivity  20mv/mm/s±0.3%  30mv/mm/s±0.3%  50mv/mm/s±0.3%
Frequency Response  10-1000Hz
Measuring Range 0-10mm/s  0-20mm/s  0-30.0mm/s  0-40.0mm/s  0-50.0mm/s  0-100um   0-200um  0-300um   0-500um     0-1000um
T  0-200℃
Signal Output  standard current 4-20mA (default when order) or
Output Impedance  ≤500
Power supply  DC24V
Max acceleration  10g
Measurement Direction  vertical or horizontal
Mounting method  vertical or horizontal mounted on the measured vibrating point
Mounting thread  Leechs / ThreadM8X1.0
Ambient Temperature  -40℃ to 85℃,
Relative humidity  ≤90%
Size  φ39×82mm,           
Weight  About 400g

Temperature Curve Parameters


Frequency response curve parameters


Vibration dimension


Wiring Diagram


RemarkThis product has anti-inversion function inside, so there is no positive or negative difference between the lead wire, that is, +24V to connect one line at will, 4-20mA to connect another line.

Order Code

MIC-TZD Selection of Piezoelectric Integrated Vibration and temperature  Transmitter


              TZD  Type

C measuring range

T  temperature

D  Thread

E Wire length

F  Output

B(Non explosion-proof






V:01: 0~10mm/s

02: 0~20mm/s

03: 0~30mm/s



01: 0~100um

02: 0~200um

03: 0~300um






11: M8*1.2512: M10*1.0

13: M5*0.8

14: 1/4~28

15: Leechs


01: 1m02: 2m

03: 3m




4:4-20mA (default)SRS485

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • MIC300AG Paperless Recorder 6Channels

      MIC300AG Paperless Recorder 6Channels

      Specification Analog Input Specification Input Signal Linear Voltage : 0-5V, 1-5V, standard range: -20000 to 20000. Linear current : 0-10mA ,should be external connection with 500Ω resistor; 4-20mA and should be external connection 250Ω precise resistor. Standard range: -20000 to 20000. Thermocouple Input: K ( -50 ~ 1300℃ )、S ( -50 ~ 1700℃ )、T ( -200 ~ 350℃ ) 、E ( 0 800℃ )、 J ( 0 ~ 1000℃ )、B ( 300 ~ 1800℃ )、N ( 0 ~ 1300℃ ), ...

    • MIC800G 8Channels Extensible Data Logger

      MIC800G 8Channels Extensible Data Logger

      Specification Analog Input Specification Input Signal Thermocouple: 10 types (K,S,B,E,J,N,R,T,WRe526,WRe325) RTD-Resistance bulbs: 3 types(Pt100, CU50,CU100) Linear DC Voltage: (0-5VDC, 1-5VDC,0-10VDC) DC Current: (4-20mA, 0-10 mA) mV:0-20mV,0-60mV, 0-100mV, 0-500mV Accuracy 0.2 grade when RTD, linear voltage, linear current and T.C input 0.2%FS±2.0℃ when T.C input with cold junction compensation by internal part of recorder. Sam...

    • thermocouple types – Screw type

      thermocouple types – Screw type

      Specification Product model thermocouple types - Screw type Type  Type K thermocouple/ PT100 Accuracy grade Class I, Class II Lead material Two/three silver plated FEP shielding wire Probe size Support for custom Wire length Support for custom Temperature range K (- 50 ~ 1300 ℃) PT100: -200 to 500℃ for Class A, -200 to 600℃ for Class B Cu50 ( -50 ~ 150℃ ) , Cu100 ( -50 ~ 150℃ ) Protection tube material  PVC cable, high tempe...

    • Explosion-proof vibration transmitter

      Explosion-proof vibration transmitter

      Application Sensitivity 20mv/mm/s±5%  30mv/mm/s±5%  50mv/mm/s±5% Frequency Response 5-1000Hz Measuring Range 0-10mm/s  0-20mm/s  0-30.0mm/s  0-40.0mm/s  0-50.0mm/s Signal Output standard current 4-20mA (default when order)   RS485 Output Impedance ≤500 Power supply DC24V Max acceleration 10g Measurement Direction vertical or horizontal Mounting method vertical or horizontal mounted on the measured vibrating point Mounting ...

    • S type thermocouple

      S type thermocouple

      Specification Product model S type thermocouple Accuracy grade Class I, Class II Test quality standard IEC584, IEC1515, GB/T16839-1997, JB/T5582-91 Element wire diameter Single type: 2-8mm, Double type: 3-8mm, Customized Protection tube materia The default material is 99 corundum outer tube, stainless steel 3039 outer tube and silicon carbide protective sleeve can be customized Measurement range 50 to 1700℃ Mount method fixed o...

    • KH300AG Intelligent Mini Color Paperless Recorder

      KH300AG Intelligent Mini Color Paperless Recorder

      Application Petroleum, Chemical, Pharmaceutical, Metallurgy, Paper, Electricity, Nuclear power, Food, Cement, Building, aviation, Medical University lab, Marine, Sewage treatment etc Front Panel Time Display Indicate date and time of recorded data Alarm State Display Alarm state display: HH, LL, H,L alarm types Bargraph Display Allow you to view data in digital, tr...